30September to 2nd October 2009

On the 30th we removed a cable which was hazardious to the community of Sehoale and we installed it in a safe way because it was running on top of the ground,now it is burried under the ground.On the 01st of October,we went to Sehoale and helped the community to clean the environment and in the afternoon we attended excel class with Miss Heidi.We learned about formulas,macros and fillng.On the 2nd we were on job training,we cleaned and packed the storeroom.

28 & 29 September 2009

On the 28th we digged a trench at Sehoale for a 16mm cable,we installed it from the main supply to the house.On the 29th we did house wiring in Sehoale and installed a new DB in a house,also did a fault finding on a cable that was tripping,the fault was found and cable was replaced.In the afternoon we did excel class taught by Miss. Heidi.

14 to 17 September 2009

On Monday we cleaned the storeroom and finished our carpentry work.On Tuesday we started with the computer module 7569(Basic concept of databases).We also did lighting system maintenance around the farm.We did a little bit of carpentry.

9 to 11 September 2009 Assessment days.

We did two modules assessments on the 9th ,which are 9010 and 9013,the first day went well. Day 2 we did 8968 and 8969 ,it also went well.The last day of assessments we did one module which is 113865.All this modules were assessed by Mr. R.S. Hagemann.

7 & 8 September 2009

We replaced a faulty pressure pump at Moselesele bush camp and installed plugs at student house and cleaned the DBs.

31 to 04 September 2009

During this week we did carpentry,welding a bicycle stand.We also did maintain lighting system at the Caravan park.We installed a stove at Sehoale.And in the afternoons we did us id :8969 with Miss. HEIDA.

24 to 28 August 2009

uring this week we did module 13865(Operate on low voltage network).We learned more about the paper work your must do when operating low voltage network and also about the safety that goes with it. We also did some safety inspection around the farm look for electrical faults.We got some faults in some DBs and filed a report about them.We even took picture of them.I really learned alot that i didn't know before.

17 to 21 August 2009 of Handyman course.

We were introduced to our handyman course facilitator Mr. Gerhard. He introduced us to the module and it was about welding, plumbing, carpentry,painting and building.I learned about safety precautions in every job and the basics of all the above mentioned jobs. We were in class for two days. So for the whole three days we were implementing what we learned in class, in the workplace.We did a bit of painting,carpentry and ark welding. We welded a bicycle stand.